Maintenance instructions for high-pressure vortex air pumps

　　Nowadays, when many customers are consulting or purchasing vortex air pumps, sales staff often talk about the reliability of the machine. So what does this reliability mean? Many consumers are not very clear about the reliability of the vortex air pump. A few points of understanding.

　　A good quality vortex air pump can run continuously and uninterrupted 24 hours a day without failure. If in actual use, if the fan is not running under full load, then this value will be even higher. Even without any maintenance, it can be used for several years. From the perspective of consumers, it is very cost-effective. However, if the quality of the gas ring vacuum pump is not good, it will not reach the ideal operating state and use time. of.

　　Now more and more companies and equipment use vortex air pumps. With the continuous development of our science, technology and economy, and the continuous upgrading of equipment, there are more and more types of air pumps on the market; if you are using fans In the process, some faults cannot be solved well, so the use effect of the fan will definitely reach the ideal state. I believe this is not the result that users want to see, and even began to doubt the quality of the fan, but how can we maintain the effect of the fan? How can we try to avoid the failure of the fan during use? How to solve and prevent it?

　　In order to use this kind of fan for a long time, in fact, the most important thing is to prevent it from two aspects, one is the pressure control, and the other is the protection of the fan. If these two problems can be well solved and prevented in the early stage of use of the air pump, the effect of the fan will be greatly guaranteed. Details can be parameterized in the following methods.

　　The pressure problem mainly refers to the pressure control of the fan during operation. The use pressure of the fan directly affects the service life of the fan. Each vortex fan has its pressure range value. If it exceeds the safe range value, the fan will easily burn out. Therefore, we must be optimistic about the pressure range of this model of fan. The pressure of the fan is controlled within the optimal range. In response to pressure, the pressure relief valve is used to protect the fan. It is an unloading valve. When the operating pressure of the high-pressure fan exceeds the pressure set by the pressure relief valve, the pressure relief valve will automatically open to release the excess pressure. To protect the fan.

　　Protection refers to the dust and particles encountered in the use of the fan. Excessive dust from the fan will affect the use of the fan. If the dust phenomenon is very serious, it will also cause a series of failures of the fan. For dust, filters are often used. According to different application sites, it often uses filter elements with different filtration accuracy to filter out different dust sizes.

　　These two problems are encountered by most fan users. After use, the effect is more obvious, and it is worth using for users. Users should pay special attention to these two points when using the blower.

Read recommendations:

DH21-016 Pneumatic Hammer Drill

DC11-100 Electric Core Drill

Ex-proof Sleeves

Carbide Hollow Bits丨DM818 Series

Automatic band sawing machine is developing towards refinement