You are here: > Home > News > Industry News

How to prevent the occurrence of vortex pump failure in advance

source:Industry News release time:2021-08-09 Article author:Rosit Popular:Air band saw

  How to prevent the failure of the vortex air pump in advance. The vortex air pump is highly applicable and can be used in a variety of industries and machinery. How to minimize the damage rate of the vortex air pump? It emphasizes the importance of preventing problems before they happen. Before we do anything, we can learn to look at the problem with a long-term perspective, find and solve the problem early. This sentence also applies to the high-pressure vortex fan industry. We can prevent it from the following aspects.

Chain saw accessories-01

  1. Regularly check or observe whether there are any abnormalities during the operation of the fan. During the start, operation or stop of the fan, if any abnormality is found, it should be shut down immediately for inspection and maintenance, and the cause of the abnormality should be found out, and try to eliminate the situation or deal with it Faults, if minor faults cannot be eliminated, check and repair immediately, and do not continue to run to avoid aggravating the fault

  2. In addition to careful observation, you can detect and observe the noise of the fan. Once you find that the noise suddenly increases or the sound is different than usual (such as friction or occasional harshness), you must try to find the cause of the increase in noise. In many cases, the fan fails. One of the first forms of expression reflects the difference in sound.

  Attention should be paid to the maintenance of the vortex pump:

  1: After the fan has been used for a period of time, if too much dust or dirt is found, pay attention to cleaning up the dust, dirt and other impurities in the fan and gas pipeline. If there is water stains, pay attention to air drying to prevent it from rusting.

  2: When the fan is damaged and needs to be repaired, the power must be cut off and the machine must be shut down during operation. The switch should be supervised by a dedicated person to prevent midway power supply. If it cannot be repaired, it can be returned to the factory for maintenance by professional maintenance personnel. .

  3: Carefully record, count, and check the quantity of tools and raw materials (including the number of screws, gaskets, and record the installation location) before and after maintenance to prevent it from being left in the fan and pipeline, or improper installation that affects the performance of the fan.

  4: Power-on test to ensure that the fan is connected correctly, and then turn it on again. Do not stand in the direction of the entrance and exit of the fan during the test run.

  5: Irrelevant persons are strictly forbidden to be onlookers during installation, maintenance and testing.


Read recommendations:

GA21-178 Pneumatic Wet Grinder

AN51-6000 Electric servo CNC Torque Wrench

Platform Clamps丨CB863-19

Pipe Fixed Clamps丨CB861-18

Failure analysis of hydraulic wrench in use.Air impact wrench company

Previous:How is the anti-corrosion vortex air pump developed? Next:Vortex air pump for industrial dust collection

related articles

Using Chainsaws to Cut Snow?

2024-05-21

What to do if the pneumatic wrench is weak

2022-12-19

Hydraulic chain saw

2022-12-13

Operation of the wrench

2022-12-06

Introduction to the principle of pneumatic wrench

2022-11-28

How to use the pneumatic wrench

2022-11-21

Brief introduction to the principle of pneumatic wrench

2022-11-14

Impact pneumatic wrench

2022-11-07

Correct hydraulic wrench operation procedure

2022-11-01

Hydraulic wrench torque pressure conversion

2022-11-01

Field operation procedure of hydraulic wrench

2022-10-24

Hydraulic radial plunger motor

2022-10-17

The history of hydraulic motors

2022-10-17

Principle of balance hydraulic wrench

2022-10-10

The Price Factor of Smart Electric Torque Wrench

2022-10-10

Introduction to the advantages of using intelligent electric torque wrench

2022-10-10

The Price Factor of Smart Electric Torque Wrench

2022-10-10

Classification and use of wrenches

2022-10-10

hydraulic wrench pressure conversion

2022-10-10

Introduction to the advantages of the use of intelligent electric torque wrench

2022-10-10

Smart Electric Torque Wrench Selection Guide

2022-10-10

Intelligent electric torque wrench for wind power generation

2022-10-09

Uses of open-end wrenches.Pneumatic chainsaw

2022-10-08

What are the driving parts of a hydraulic wrench and what they do

2022-09-30

What are the driving parts of a hydraulic wrench and what they do

2022-09-23

the commonly used wrenches

2022-09-22

Introduction of several common wrenches

2022-09-21

Application scope and daily maintenance method of hydraulic bolt tensioner

2022-09-20

Characteristics of hollow hydraulic wrench and precautions for use

2022-09-19

Characteristics and precautions of driving hydraulic wrench

2022-09-17

Power Tools

DH21-016 Pneumatic Hammer Drill

2020-06-13

GG11-230 Electric Angle Grinder

2023-06-28

CB21-120 Pneumatic Band Saw - Aluminum Alloy Series

2023-01-06

AN22-1800 Pneumatic Torque Wrench (Straight Shaft)

2023-06-27

GG21-178 Pneumatic Angel Grinder

2020-06-13

AK22-080 Pneumatic C-Hog Ring Plier (2.0 coil)

2023-06-29

AW21-2200 Pneumatic Impact Wrench (Ex-proof Series)

2021-06-15

AN31-4500 Hydraulic Torque Wrench

2023-06-27

DP22-200 Pneumatic Column Drill

2023-06-19

AW21-2000 Pneumatic Impact Wrench (Ex-proof Series)

2021-06-15

GA21-140 Pneumatic Wet Grinder

2023-06-28

DA21-075 Pneumatic Angle Drill

2023-06-19

RH31-2100 Hydraulic Chipping Hammer

2022-12-27

RC21-1800 Pneumatic Long Reach Scalers

2023-06-27

DB21-018 Pneumatic Rotary Drill Heavy Duty

2020-06-13

OW21-020 Pneumatic Mining Waterjet Cutting Machine

2023-05-10

CD31-630 Hydraulic Concrete Chainsaw

2023-06-16

DM21-030 Pneumatic Magnetic Drill

2020-06-13

LW21-025 Pneumatic Winch

2023-06-29

CS31-300 Hydraulic Handheld Circular Saw

2021-06-15

CS31-180 Hydraulic Handheld Circular Saw

2021-06-15

AW21-600 Pneumatic Impact Wrench (Ex-proof Series)

2021-06-02

AN23-6000 Pneumatic Torque Wrench (Angle Shaft)

2024-03-12

RH31-1550 Hydraulic Chipping Hammer

2023-06-27

OW65-020 Split Emulsion Type Mining Waterjet Cutting Machine

2023-05-10

DM11-050 Electric Magnetic Drill

2022-12-30

DM11-032 Electric Magnetic Drill

2023-06-19

AN32-23000 Hollow Hydraulic Wrench

2023-06-27

DA31-032 Hydraulic Angle Drill

2022-12-15

AN22-2500 Pneumatic Torque Wrench (Straight Shaft)

2023-06-27