ROSIT - Pneumatic and hydraulic Tools - Power For Safety

Language

English Espana Deutschland Chinese

Visitor Center

My Wish List Last Viewed Products

English Espana Deutschland Chinese

My wish list Last viewed products

You are here: > Home > News > Industry News

News

What kind of inspection should be carried out before the sawing machine is used?

source:Industry News release time:2021-05-24 Article author:Rosit Popular:Air band saw

　　What kind of inspection should be carried out before the sawing machine is used?

　　1. Maintenance of the sawing machine Before operating the machine, the sawing machine should also be checked to see if it is suitable for starting up. If there is a need for adjustment and processing but not processing, it may damage the machine tool or affect the processing quality at the beginning of use. Let's talk about what aspects of the sawing machine should be checked before use.

　　1. Check the position of the chip cleaning brush, adhere to the removal of tooth grooves and iron filings, and adjust or replace the chip cleaning brush if necessary. Check the height of the chip cleaning steel brush so that the steel brush just touches the bottom of the serration. It should not be higher than the bottom of the saw teeth, as this will cause excessive wear of the saw band or steel brush.

　　2. Check the position of the oil gauges of the gear box and hydraulic box, whether there is a need to increase gear oil 150# and hydraulic oil 32#;

　　3. Check whether the cooling water altimeter has increased demand;

　　4. Check whether the orientation of the saw band on the main and passive wheels and the tungsten steel guide blade is correct;

　　5. Check the saw band tension adjustment valve to select the appropriate sawing pressure; the maximum tension of the high-speed hacksaw band is 55klbs/in2

　　6. Check that the pressure of the tungsten steel oil pressure gauge is 30+2kg/cm2;

　　7. Check the tension belt of the gear box;

　　8. Before installing a new saw band, remove the iron filings from the flanges of the driving and driven wheels (the iron filings may accumulate).

　　Second, just as the car needs regular maintenance, the sawing machine needs to be maintained and replaced after a period of use, so that the sawing machine can operate normally.

　　1. Replacement of steel brush. The steel brush can remove the iron filings on the saw band and prevent the iron filings from being carried into the saw wheel or even the saw band guide. It is suitable for the main side. The steel brush of the fault device will cause excessive wear of the saw band or steel brush, and will also cause instability during sawing.

　　2. Cooling water replacement When the coolant is to be replaced under normal use, the iron filings in the cooling water storage tank must be cleaned up every three months.

　　3. Replacement of hydraulic oil The hydraulic oil should be replaced every six months.

　　4. Replacement of gear oil The gear oil must be replaced after less than six months or 1200 hours of use.

Read recommendations:

AK22-030 Pneumatic C-Hog Ring Plier (2.0 coil)

CR21-001 Light Pneumatic Reciprocating Saw

Carbide Hollow Rail Drill Bits丨DM822 Series

Measures for the Damage of the Saw Blade of the Circular Saw

Previous:The saw blade manufacturer needs to open the upper and lower guards first when replacing the saw bla Next:Classification and selection of saw blades for metal band sawing machines

related articles

Using Chainsaws to Cut Snow?

What to do if the pneumatic wrench is weak

Hydraulic chain saw

Operation of the wrench

Introduction to the principle of pneumatic wrench

How to use the pneumatic wrench

Brief introduction to the principle of pneumatic wrench

Impact pneumatic wrench

Correct hydraulic wrench operation procedure

Hydraulic wrench torque pressure conversion

Field operation procedure of hydraulic wrench

Hydraulic radial plunger motor

The history of hydraulic motors

Principle of balance hydraulic wrench

The Price Factor of Smart Electric Torque Wrench

Introduction to the advantages of using intelligent electric torque wrench

The Price Factor of Smart Electric Torque Wrench

Classification and use of wrenches

hydraulic wrench pressure conversion

Introduction to the advantages of the use of intelligent electric torque wrench

Smart Electric Torque Wrench Selection Guide

Intelligent electric torque wrench for wind power generation

Uses of open-end wrenches.Pneumatic chainsaw

What are the driving parts of a hydraulic wrench and what they do

What are the driving parts of a hydraulic wrench and what they do

the commonly used wrenches

Introduction of several common wrenches

Application scope and daily maintenance method of hydraulic bolt tensioner

Characteristics of hollow hydraulic wrench and precautions for use

Characteristics and precautions of driving hydraulic wrench

Power Tools

CH21 series Pneumatic Pipe Cutter

DM11-100 Electric Magnetic Drill

AN51-1600 Electric servo CNC Torque Wrench

AN31-100000 Hydraulic Torque Wrench

GP61-200 Emulsion Submersible Pump

LH22-006 Pneumatic Hoist

DM31-035 Hydraulic Magnetic Drill

RZ21-020 Pneumatic Rammer

CN21-2432 Nut Cutter丨Manual Integrated Nut Cutter

DC31-400 Hydraulic Core Drill

GA21-125 Pneumatic Wet Grinder

CB21-120 Pneumatic Band Saw - Aluminum Alloy Series

DH21-026 Pneumatic Hammer Drill

RH31-1350 Hydraulic Chipping Hammer

RZ21-014 Pneumatic Rammer

GA21-140 Pneumatic Wet Grinder

DP61-060 Emulsion Two Hand Operation Drill

AN71-2000 Torque Multiplier

LW21-002 Pneumatic Winch

AN31-10000 Hydraulic Torque Wrench

AW41-3500 Emulsion Impact Wrench

LW21-020 Pneumatic Winch

OF27-200 Heavy Fixed Fan

DP61-110 Emulsion Two Hand Operation Drill

AN71-5500 Torque Multiplier

CB31-160 Hydraulic Band Saw

DM31-013 Hydraulic Magnetic Drill

RH31-1250 Hydraulic Chipping Hammer

LW21-025 Pneumatic Winch

LH22-005 Pneumatic Hoist

Accessories

Alloy Drill Bits丨812 Series

Platform Clamps丨CB863-19

Hard Alloy Hollow Drill Bits assy.丨DB85 Series

Integrated Hollow Drill Bits丨DC81

Guide Bars

Alloy Drill Bits丨811 Series

Drill Bit Extension Rods丨DC88 Series

Cross Clamps丨CB862-22

Hard Alloy Hollow Drill Bits assy.丨DB84 Series

Regular Saw Chains丨CC811 Series

Clamps

Alloy Saw Blades丨CR814 Series

Filter assy.

Ex-proof Sleeves

Diamond Saw Blades

Carbide Hollow Rail Drill Bits丨DM822 Series

Water Pump

Diamond Saw Chains

Diamond Saw Chains丨CC813 Series

Abrasive Blades

Split Hollow Drill Bits丨DC82

Pin

Sleeve KIT

Alloy Sleeves

Pipe Fixed Clamps丨CB861-12

Ex-proof Sleeves KIT

Alloy Twist Drill Bits丨DB81 Series

Pipe Fixed Clamps丨CB861-18

Diamond Saw Blades

Alloy Drill Bits丨813 Series

CONTACT: +49 69 6780 8096; +49 69 6780 8326; info@rosit.eu

COMPANY INFO

ABOUT NEWS
PRODUCT SUPPORT

WARRANTY TOOL MAINTENANCE FAQs
CUSTOMER SERVICE

SERVICE CENTER CONTACT US Enquiry
CONTACT

+49 69 6780 8096 +49 69 6780 8326 info@rosit.eu
Follow Us