First,understand the material to be cut, and if necessary, reduce the
rotation speed of the saw blade by reducing the air pressure.Ensure that the
material to be cut is firmly fixed to prevent it from moving;

Second,when using a pneumatic air motor, press the valve stem with your
fingers and then start cutting.Use the weight of the saw to control the cutting
pressure.
For softer materials, this weight is sufficient. Excessive pressure will
reduce the speed of the saw blade.
For harder materials, pressure can be used to reduce the rotation speed of
the saw blade.
Third,when closing the air motor,release the valve stem.The saw blade must
be kept in motion before the next cutting starts. When using a pneumatic saw,
the saw blade cannot touch any surface.
Fourth,when disconnecting the air hose,close the air hose valve.Before
disconnecting, open the air valve to reduce the pressure of the hose.
Fifth,before replacing the saw blade,be sure to disconnect the air hose and
push the valve stem to release the pressure in the motor.
At last,turn the adjustment handle clockwise to release the tension on the
saw blade guide.Then release the lock on the side panel to open the side panel.
Then remove the saw blade from the drive wheel and release it from the saw band
guide.
Rosit is a leader in the global power tool service market. We take
electric, pneumatic and hydraulic drive technology as the core. Our product
categories mainly include hand tools, instruments, workshop equipment and fixed
tools, labor protection products, industrial equipment,chemicals and so on.
At the same time, we provide customers with a series of system solutions
and communication channels to help customers improve procurement, inventory,
logistics and management costs.
Read recommendations:
OF27-950 Heavy Fixed Fan
AN71-5500 Torque Multiplier
Cutting Blades
Ex-proof Sleeves
Analysis of the reasons why the front reaction arm wrench cannot return to its original position