The cleaning and maintenance of the air filter of the chain saw has an
impact on the life of the air filter.The following is the maintenance of the air
filter.
First,adjust the air door to the choke position to prevent dirt from
entering the intake pipe.

Second,place the foam filter in a clean non-flammable cleaning fluid to
wash and dry,such as hot soapy water.
Third,replace the felt filter. If it is not too dirty, you can tap or blow
it lightly, but the felt filter cannot be cleaned.
In addition, note that the damaged filter element must be replaced. When
installing, pay attention to putting the marked side of the felt filter into the
filter housing.
Rosit is a leader in the global power tool service market. We take
electric, pneumatic and hydraulic drive technology as the core. Our product
categories mainly include hand tools, instruments, workshop equipment and fixed
tools, labor protection products, industrial equipment,chemicals and so on.
At the same time, we provide customers with a series of system solutions
and communication channels to help customers improve procurement, inventory,
logistics and management costs.
Read recommendations:
AN31-35000 Hydraulic Torque Wrench
RH31-1550 Hydraulic Chipping Hammer
Core Drill Morse Taper Sleeves
Alloy Sleeves
Which aspects of the inspection should be carried out before the sawing machine is used?