The standard use of hydraulic wrenches protects not only the tools but also
the safety of the operators!

The standard use of hydraulic wrenches protects not only the tools, but
also the safety of operation and control personnel! Why do we repeatedly
emphasize (qiáng diào) standard operation control? Because we often go to
customer sites to visit or service (fú wù) colleagues found that although we
When training customers (functions: knowledge transfer, skill transfer, standard
transfer), the importance of standard operation will be seriously emphasized
every time, but in the operation, many people still use hydraulic wrenches very
casually. Do not pay attention to whether there is a safety hazard in this use.
The hydraulic wrench transmits power to the working head through the
high-pressure oil pipe and the hydraulic pump, which drives the working head to
tighten or loosen the nut. The hydraulic pump can be driven by electricity or
compressed air. The working head of the hydraulic wrench is mainly composed of
three parts, the frame (also called the shell), the oil cylinder and the
transmission parts. The output force of the oil cylinder, the piston rod of the
oil cylinder and the transmission part form a motion pair. The distance from the
center of the oil cylinder to the center of the transmission component is the
hydraulic wrench amplification arm. The oil cylinder output multiplied by the
arm is the theoretical output torque of the hydraulic wrench. The actual output
torque is smaller than the theoretical output torque. For example, if the
position of the reaction force arm is placed, if the position is so large that
the partial load is too large, it may cause damage to the wrench. Although this
kind of damage may not be reflected (tǐ xiàn) at the time, it is very After many
times, the overloaded part may break (fracture) in high-pressure use and cause
personal injury. There may be problems (Emerson) due to improper sleeves or
sleeves not in place. Therefore, attention must be paid to it during use.
Read recommendations:
CC20-630 Pneumatic Chainsaw (3.0 kw Series)
DP22-200 Pneumatic Column Drill
Carborundum Saw Chains
Platform Clamps丨CB863-19
The saw blade of the band saw