You are here: > Home > News > Industry News

What to do if the pneumatic wrench is weak

source:Industry News release time:2022-12-19 Article author:yu Popular:Air band saw

  AK21 series 1.5 coil  丨 Pneumatic Anchor Net Connecting Machine

  The pneumatic wrench is a commonly used wrench, especially in the field of automobile repair. All friends who have used the pneumatic wrench have encountered such a situation, that is, the pneumatic wrench is ineffective. What is the reason? What to do if the pneumatic wrench is weak?

  1. The pneumatic wrench was not lubricated for maintenance

  When the pneumatic wrench works, the lubricating oil will also be discharged from the exhaust hole along with the gas. The purpose of refueling is not only to lubricate the machine, but also to discharge the sludge and other dust inside the motor along with the lubricating oil. If you do not add lubricating oil for a long time, the impeller inside the pneumatic motor will be worn, and there will be no force. Maintenance method: add lubricating oil.

  2. Air compressor problem

  The air compressor contains too much water, and the water is not drained in time. The aging of the air compressor and the aging and air leakage of the pipe may lead to the inability to provide enough power for the pneumatic wrench. Maintenance method: check the air compressor and pipeline problems, repair or replace them; The air compressor shall be drained regularly and timely. If conditions permit, an oil-water separator or dryer can be installed.


Read recommendations:

AK22-080 Pneumatic C-Hog Ring Plier (2.0 coil)

AN31-180000 Hydraulic Torque Wrench

Cross Clamps丨CB862-22

Hydraulic Regulating Valve

Operation of Pneumatic Grinder

Previous:Hydraulic chain saw Next:there is none left

related articles

What to do if the pneumatic wrench is weak

2022-12-19

Hydraulic chain saw

2022-12-13

Operation of the wrench

2022-12-06

Introduction to the principle of pneumatic wrench

2022-11-28

How to use the pneumatic wrench

2022-11-21

Brief introduction to the principle of pneumatic wrench

2022-11-14

Impact pneumatic wrench

2022-11-07

Correct hydraulic wrench operation procedure

2022-11-01

Hydraulic wrench torque pressure conversion

2022-11-01

Field operation procedure of hydraulic wrench

2022-10-24

Hydraulic radial plunger motor

2022-10-17

The history of hydraulic motors

2022-10-17

Principle of balance hydraulic wrench

2022-10-10

The Price Factor of Smart Electric Torque Wrench

2022-10-10

Introduction to the advantages of using intelligent electric torque wrench

2022-10-10

The Price Factor of Smart Electric Torque Wrench

2022-10-10

Classification and use of wrenches

2022-10-10

hydraulic wrench pressure conversion

2022-10-10

Introduction to the advantages of the use of intelligent electric torque wrench

2022-10-10

Smart Electric Torque Wrench Selection Guide

2022-10-10

Intelligent electric torque wrench for wind power generation

2022-10-09

Uses of open-end wrenches.Pneumatic chainsaw

2022-10-08

What are the driving parts of a hydraulic wrench and what they do

2022-09-30

What are the driving parts of a hydraulic wrench and what they do

2022-09-23

the commonly used wrenches

2022-09-22

Introduction of several common wrenches

2022-09-21

Application scope and daily maintenance method of hydraulic bolt tensioner

2022-09-20

Characteristics of hollow hydraulic wrench and precautions for use

2022-09-19

Characteristics and precautions of driving hydraulic wrench

2022-09-17

Selection of hydraulic jack

2022-09-16